MSI Laminator II

MSI Transducer Corporation | Location:  Littleton, MA


Under minimal supervision prepares, assembles, and test all laminated assemblies for use in ultrasonic sensors.


Observes all safety regulations including handling protective equipment applicable to the use of electrical tooling and equipment and applicable to handling chemicals (including flux, isopropyl, alcohol, epoxies, solder, and urethane foam).

  • Observes all safety regulations including personal protective equipment applicable to the use of electrical tooling and equipment and applicable to handling chemicals (including flux, isopropyl, alcohol, epoxies, solder, and urethane foam).
  • Must be able to handle pack and assemblies of up to 20 lbs.
  • Reads Bill of Materials and Work Instructions to determine what is required for each lamination.
  • Organizes daily assignments.
  • Washes steel and aluminum discs in the degreaser by submerging into aqueous solution.
  • Cleans ceramics with isopropyl alcohol and paper towels.
  • Smoothes steel and aluminum surfaces by operating sandblaster.
  • Measures the thickness of the steel and aluminum using calipers and BOM for reference and forwards non-conforming materials for disposition.
  • Laminates cork to elements.
  • Laminates cork and elements to backplate.
  • Groups ceramics for dual frequency laminations and groups laminated elements for commercial packs.
  • Operates drill press to evenly distribute epoxy and drills for lugholes.  Inserts lugs and verifies correct orientation.
  • May operate spot welder and sets the arm and weld range, then depresses the foot pedal.
  • Solders prep elements.
  • Weighs and mixes epoxy for use between the layers of the elements and on cork/foam prep.
  • Fills foaming machine tanks following work instructions.
  • Operates air vise to press and secures elements together.
  • Cures elements in oven for appropriate length of time.
  • Calculates lathe setup and operates lathe to machine appropriate window thicknesses on all matching layers.
  • Phases elements for pack assemblies.
  • Calibrates test fixtures using computer program.
  • Communicates material issues on all required, expensed department materials to appropriate purchasing buyer.
  • Assembles foam packs: gathers prepared elements, solders to lugs mesh tabs, places in proper foaming mold and dispenses foam per work instructions and/or BOM.
  • Tests frequency and impedance using digital and analog test equipment and phases elements using special test equipment.
  • Troubleshoots testing and communicates all test issues with Test Engineer.
  • Assists in commercial assembly.
  • Assists in LAB on new lamination assemblies.
  • Maintains clean and orderly work area.
  • Ability to interact positively as a team member with co-workers and supervision.
  • Tests for capacitance, resonant frequency, anti-resonant frequency, AF, and impedance on laminated packs.  Documents on test log.
  • Periodically empties and cleans sandblaster cabinet; refills sand.
  • Assists Laminator I in the absence of supervisor. Assists in Laminator training.
  • Sandblasts foam packs and forwards completed foam packs to assembly departments.
  • Reclaims material by operating a torch and heating the rejected element to pry them apart.
  • Maintains clean and orderly work area.
  • Completes all necessary paperwork on jobs completed.
  • Performs all cycle counts for the department. Reconciles significant variances.
  • Enters production postings and other materials transactions using Avante.
  • Performs other related duties as may be required or directed.


  • High school education or equivalent experience.
  • One or more years as Laminator I.
  • Previous soldering experience.
  • Experience in using verniers, calipers, and other precision measuring instruments.
  • Computer literacy, basic math skills, and mechanical ability.
  • Basic understanding of the Avante computer system.


Individuals must possess these knowledges, skills and abilities or be able to explain and demonstrate that the individual can perform the primary functions of the job, with or without reasonable accommodation, using some other combination of skills and abilities and to possess the necessary physical requirement, with or without the aid of mechanical devices, to safely perform the primary functions of the job.

  • The ability to bend downward and forward by bending spine at the waist; bend legs at knee, to come to rest on knee or knees, bend the body downward and forward by bending leg and spine; extend hand(s) and arm(s) in any direction; use upper extremities to press against something with steady force in order to thrust forward, downward, or outward, use upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion; raise objects from a lower to a higher position or move objects horizontally from position to position; to pinch, pick or otherwise primarily work with fingers. Primary functions are performed sitting or standing or a combination of both.
  • Visual acuity sufficient for work which deals largely with mechanical assembly and/or visual inspection involving small parts/defects.
  • Ability to wear protective clothing such as mask, gloves, safety glasses and or safety shoes as required.
  • Ability to perform repetitive or routine duties working from detailed instructions and under standard procedures.
  • Ability to endure periods of heavy workload or excessive stress.
  • Ability to interact positively as a team member with co-workers and supervision.
  • Ability to lift up to 50 lbs.

If you meet these criteria, please forward your resume to: